<tbody id="fqcyu"><pre id="fqcyu"></pre></tbody>
<dd id="fqcyu"></dd>

  1. E-mail: sales@winnix.net

    Four Antenna Ports R2000 Chip UHF Rfid Reader Module

    Products Mode: HYM750
    Chip: Impinj R2000
    Fixed Current: ≤1.6 A
    Fixed Power: 30dBm
    Stepping Interval: 1dBm
    Tag Protocol: EPC C1G2/ISO18000-6C
    Typical Read Range: 15m with 8dBi rfid antenna

     

    tubiao.png Brief introduction

    HYM750 UHF RFID reader module uses R2000 chip, which complies with ISO18000-6C protocol, with LBT function(Customizable).It supports dense reader working mode(DRM). With standard 8 dBi antenna,the reading distance can reach up to 10 meters, maximum identifying speed can reach up to 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, apparel, medical industry, and complex assets management, etc.

     

    tubiao.png Technical data

    No Item Technical data Unit Remark
    1 Fixed current 1.2 A Max power output
    2 Standby current ≤1 mA EN pin low level
    3 Frequency range 840~960 MHz  
    4 Default working frequency Frequency hopping MHz Frequency interval 250KHz
    5 Channel bandwidth ≤250 KHz  
    6 Frequency hopping speed ≤2 s  
    7 Fixed power 30 dBm  
    8 Stepping interval 1 dB 5~30dBm, adjustable by software
    9 Label protocol EPC C1G2
    /ISO18000-6C
       
    10 Communication protocol Asynchronous serial ports protocol    
    11 Starting time ≤50 ms  
    12 Radio-frequency power rising time ≤500 μs  
    13 Radio-frequency power dropping time ≤500 μs  
    14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
    ≤-60 dB ±2CH
    15 Frequency stabilizing ratio ±10 ppm -25℃~+40℃
    ±20 ppm -40℃~+60℃
    16 Max reading range 10 m 8dBi antenna
    17 Multi-tags >400/s    


    tubiao.png Characteristics of DC

    Data Mini value Typical value Max value Unit Remark
    Voltage of power 4.5 5 5.5 V Direct current
    Input high level 2 3.3 5.5 V GPIO
      2 - 5 V EN
    Input low level -0.3 0 0.8 V GPIO
      - - 0.18 V EN
    Output high level 2.9 - - V GPIO
    Output low level - 0 0.1 V GPIO
    Enable current 2 5 25 uA VEN≥2V


    tubiao.png Requirement on antenna

    No Item Technical data Unit Remark
    1 Standing wave ratio ≤1.5    


    tubiao.png Appearance and structure

    • Size: 76.5×39.7×9mm
    • Weight: 50g

    1.jpg

     

    tubiao.png Interface definition

    Pin Signal name Signal direction Function/compatibility description
    1 VCC Input Module supplying power
    2 VCC Input Module supplying power
    3 GND - Module connecting ground
    4 GND - Module connecting ground
    5 EN Input Module enabling,highly effective
    6 GPIO Bidirection Generic port
    7 GPIO Bidirection Generic port
    8 GPIO Bidirection Generic port
    9 UART_RX Input Asynchronous serial interface receiving
    10 UART_TX Output Asynchronous serial interface sending
    11 DBG_RX - Test port
    12 DBG_TX - Test port


    tubiao.png Environment requirement

    No Item Technical data Unit Remark
    1 Working temperature -25~+75  
    2 Storage temperature -40~+85  
    3 Relative humidity 10%~90% RH  


    tubiao.png Certification

    FCC ID: RVZHYM750
    CE: ETSI EN 302 208
    ETSI EN 301 489
    ETSI EN50364


    tubiao.png Video Description

    欧美精品一区二区三区在线