<tbody id="fqcyu"><pre id="fqcyu"></pre></tbody>
<dd id="fqcyu"></dd>

  1. E-mail: sales@winnix.net

    R2000 Chip High Power Uhf Rfid Reader Module with Four Antenna Ports

    Products Mode: HYM750P
    Chip: Impinj R2000
    Fixed Current: ≤1.2 A
    Fixed Power: 30dBm
    Stepping Interval: 1dBm
    Tag Protocol: EPC C1G2/ISO18000-6C
    Typical Read Range: 10m with 8dBi rfid antenna

     

    tubiao.png Brief introduction

    HYM750P UHF RFID reader uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz,with LBT function(Customizable). It supports dense reader working mode (DRM). Max Power is 31dbm.With standard 8dBi antenna,the reading distance can reach 15meters, maximum identifying speed can reach 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc. It is well used in high performance fixed readers.

     

    tubiao.png Technical data

    No Item Technical data Unit Remark
    1 Max current 1600 mA Max power output
    2 Standby current ≤1 mA EN pin low level
    3 Frequency range 840~960 MHz  
    4 Defaul working frequency Frequency hopping MHz Frequency interval 250KHz
    5 Channel bandwidth ≤250 KHz  
    6 Frequency hopping speed ≤2 s  
    7 Fixed power 31 dBm  
    8 Stepping interval 1 dB 5~30dBm, adjustable by software
    9 Label protocol EPC C1G2
    /ISO18000-6C
       
    10 Communication protocol Asynchronos serial ports protocol    
    11 Starting time ≤50 ms  
    12 Radio-frequency power rising time ≤500 μs  
    13 Radio-frequency power droping time ≤500 μs  
    14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
    ≤-60 dB ±2CH
    15 Frequency stablizing ratio ±10 ppm -25℃~+40℃
    ±20 ppm -40℃~+60℃
    16 Max reading range >15 m 8dBi antena
    17 Muti-tags >400/s    


    tubiao.png Characteristics of DC

    Data Mini value Typical value Max value Unit Remark
    Voltage of power 3.3 4 5.5 V Direct current
    Input high level 2 3.3 3.5 V GPIO
    2 3.3 3.5 V EN
    Input low level -0.5 0 0.5 V GPIO
    - - 0.18 V EN
    Output high level 2.3 - 3.3 V GPIO
    Output low level 0 - 1 V GPIO
    Enable current 2 5 25 uA VEN≥2V


    tubiao.png Requirement on antenna

    No Item Technical data Unit Remark
    1 VSWR ≤1.5    


    tubiao.png Appearance and structure

    • Size: 76.5×39.7×9mm
    • Weight: 50g

    1.jpg

     

    tubiao.png Interface definition

    Pin Signal name Signal direction Function/compatibility description
    1 VCC Input Module supplying power
    2 VCC Input Module supplying power
    3 GND - Module connecting ground
    4 GND - Module connecting ground
    5 EN Input Module enabling,highly effective
    6 GPIO Bidirection Generic port
    7 GPIO Bidirection Generic port
    8 GPIO Bidirection Generic port
    9 UART_RX Input Asynchronous serial interface receiving
    10 UART_TX Output Asynchronous serial interface sending
    11 DBG_RX - Test port
    12 DBG_TX - Test port


    tubiao.png 6pin debug Interface definition

    Pin

    Signal name

    Signal direction

    Function/compatibility description

    1

    VCC

    Input

    Module supplying power

    2

    GND

    -

    Module connecting ground

    3

    EN

    Input

    Module enabling,highly effective

    4

    GPIO

    Bidirection

    Generic port

    5

    UART_RX

    Input

    Asynchronous serial interface receiving

    6

    UART_TX

    Output

    Asynchronous serial interface sending

    NOTICE:The 6 pin interface is for debug

    tubiao.png Environment requirement

    No Item Technical data Unit Remark
    1 Working temperature -25~+75  
    2 Storage temperature -40~+85  
    3 Relative humidity 10%~90% RH  

     

    欧美精品一区二区三区在线