<tbody id="fqcyu"><pre id="fqcyu"></pre></tbody>
<dd id="fqcyu"></dd>

  1. E-mail: sales@winnix.net

    Single Antenna Port R2000 Chip UHF Rfid Reader Module

    Products Mode: HYM740
    Chip: Impinj R2000
    Fixed Current: ≤1.5 A
    Fixed Power: 30dBm
    Stepping Interval: 1dBm
    Tag Protocol: EPC C1G2/ISO18000-6C
    Typical Read Range: 10m with 8dBi rfid antenna

     

    tubiao.png Brief Introduction

    HYM740 UHF RFID reader module uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz,with LBT function(customizable). It supports dense reader working mode(DRM)。With standard 8dBi antenna,the reading distance can reach up to 10 meters, maximum identifying speed can reach up to 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc.

     

    tubiao.png Technical Data

    No Item Technical data Unit Remark
    1 Fixed current 1.5 A Max power output
    2 Standby current ≤1 mA EN pin low level
    3 Frequency range 840~960 MHz  
    4 Default working frequency Frequency hopping MHz Frequency interval 250KHz
    5 Channel bandwidth ≤250 KHz  
    6 Frequency hopping speed ≤2 s  
    7 Fixed power 30 dBm  
    8 Stepping interval 1 dB 5~30dBm, adjustable by software
    9 Label protocol EPC C1G2
    /ISO18000-6C
       
    10 Communication protocol Asynchronous serial ports protocol    
    11 Starting time ≤50 ms  
    12 Radio-frequency power rising time ≤500 μs  
    13 Radio-frequency power dropping time ≤500 μs  
    14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
    ≤-60 dB ±2CH
    15 Frequency stabilizing ratio ±10 ppm -25℃~+40℃
    ±20 ppm -40℃~+60℃
    16 Max reading range 10 m 8dBi antenna

     

    tubiao.png Characteristics of DC

    Data Mini value Typical value Max value Unit Remark
    Voltage of power 3.6 - 5 V Direct current
    Input high level 2 3.3 3.5 V GPIO
    2 - 5 V EN
    Input low level -0.5 0 0.5 V GPIO
    - - 0.18 V EN
    Output high level 2.3 - 3.3 V GPIO
    Output low level - 0 1 V GPIO
    Enable current 2 5 25 uA VEN≥2V

     

    tubiao.png Requirement on Antenna

    No Item Technical data Unit Remark
    1 S11 ≤-10dB    


    tubiao.png Appearance and Structure

    • Dimensions:56×36×7.4mm
    • Weight:50g

    1.jpg

     

    tubiao.png Interface Definition

    • Front Interface:

    Pin Signal name Signal direction Function/compatibility description
    1 VCC Input Module supplying power
    2 VCC Input Module supplying power
    3 GND - Module connecting ground
    4 GND - Module connecting ground
    5 EN Input Module enabling,highly effective
    6 GPIO Bidirection Generic port
    7 GPIO Bidirection Generic port
    8 GPIO Bidirection Generic port
    9 UART_RX Input Asynchronous serial interface receiving
    10 UART_TX Output Asynchronous serial interface sending
    11 DBG_RX - Test port


    Back Interface:

    Pin Signal name Signal direction Function/compatibility description
    1 VCC Input Module supplying power
    4 GND - Module connecting ground
    5 EN Input Module enabling,highly effective
    6 GPIO Bidirection Generic port
    9 UART_RX Input Asynchronous serial interface receiving
    10 UART_TX Output Asynchronous serial interface sending


    tubiao.png Environment Requirement

    No Item Technical data Unit Remark
    1 Working temperature -25~+75  
    2 Storage temperature -40~+85  
    3 Relative humidity 10%~90% RH  


    tubiao.png Certification

    FCC ID: RVZHYM740
    CE: ETSI EN 302 208
    ETSI EN 301 489
    ETSI EN50364
     

    tubiao.png Video Description







    欧美精品一区二区三区在线